background image

14

15

CHANGING OUTPUT MODES

The Tornado GTL has 3 power settings – 
Red = Low, Blue = Medium, Green = High. 
The LED surrounding the button indicates 
these settings. It only shows power setting 
while adjusting the power, and not in normal 
operation, when the LED colour indicates 
battery charge. To step through these 
settings, with the device switched on, press 
the power button three times in quick 
succession. The LED will stay illuminated for 
a couple of seconds, indicating the current 
power setting.

E-LIQUID LEVEL

To prevent the atomizer head from becoming 
dry and burning prematurely, ensure 
remaining e-liquid never drops below the 4 
fluid feed holes around the bottom of the 
atomizer head.

BATTERY LIFE INDICATION

The battery indication for the Tornado GTL 
kit is measured in three phases, 100-60% 
(Green LED), 59-20% (Blue LED), <20% 
(Red LED). The LED colour will indicate the 
current battery level when the power button 
is pressed for normal operation, and in 
automatic operation.

CHARGING THE BATTERY

Insert the supplied USB-C cable into the 
Tornado GTL charge port, connect the other 
end of the charge cable to a USB port or 
suitable wall adaptor. The indicator light will 
flash the LED at the current battery level, 
when fully charged, the indicator light will 
switch off. The Tornado GTL can be used 
whilst charging.

REPLACING THE ATOMIZER HEAD

To replace the atomizer head in the Tornado 
GTL, remove the cartridge from the device 
by pulling straight up, invert the cartridge 
180 degrees and remove the atomizer head 
by pulling. If the cartridge is full, or nearly full 
of e-liquid, there will be some leakage from 
the mouthpiece, so it is best to do this over a 
piece of tissue paper. Prime a new atomizer 
head and insert into the cartridge by pushing.

Note:

 Leave a new atomizer head to sit in a 

cartridge full of e-liquid for five minutes before 
vaping. This ensures the atomizer head is fully 
saturated with e-liquid before use.  

USING YOUR TORNADO GTL

TW-Tornado-GTL-Manual-UK.indd   14-15

TW-Tornado-GTL-Manual-UK.indd   14-15

12/05/2022   15:20

12/05/2022   15:20

Summary of Contents for TORNADO GTL













Reviews: