background image

12

13

PRIMING THE ATOMIZER HEAD

It is important to “prime” a new atomizer head 
before first use. Failure to do so can damage 
the atomizer head. 
Remove the cartridge from the battery by 
pulling upwards. Prime one of the atomizer 
heads for the kit by dripping a few drops of 
e-liquid onto the cotton inlets on the side of 
the atomizer head. Insert the atomizer head 
into the cartridge by pushing and reattach the 
cartridge to the battery.

ATOMIZER HEAD LIFESPAN

Atomizer heads do not last forever and 
need to be replaced periodically. Lifespan is 
generally from a few days to several weeks, 
depending on power used, vaping style, 
flavour and type of e-liquid. A slight burnt 
taste, general loss of vapour production, 
or a reduction in flavour intensity can all be 
indicators that the atomizer head requires 
replacement.

FILLING THE CARTRIDGE

Slide the top of the cartridge in the direction 
indicated by the arrow on the top-cap. Fill the 
cartridge, ensuring an air gap of approximately 
2mm is left over the e-liquid, to avoid air-locks. 
Slide back over the cartridge to close. On 
first filling with a new atomizer head, wait 5 

minutes for the atomizer head to fully prime 
before using.

SWITCHING ON AND OFF

To switch the Tornado GTL on or off, quickly 
press the power button five times. The 
indicator light will flash three times when 
switched on or off.

VAPING

Press and hold the power button as you gently 
inhale the vapour, release the power button 
when you have finished inhaling. The indicator 
light will illuminate while the power button 
is held down. The Tornado GTL also has a 
vacuum activated switch. Simply switch the 
device on and inhale on the mouthpiece for 
automatic operation.

Please note:

 Due to the sensitivity of the 

automatic switch, the vacuum activated mode 
will only work with certain airflow settings. If 
this mode is not working, try adjusting the 
airflow to a less “open” setting.

ADJUSTING AIRFLOW

If you find airflow too airy or too tight, rotate 
the airflow adjuster to expose fewer or more 
holes of different sizes. Experiment to find 
your preference. 

USING YOUR TORNADO GTL

TW-Tornado-GTL-Manual-UK.indd   12-13

TW-Tornado-GTL-Manual-UK.indd   12-13

12/05/2022   15:20

12/05/2022   15:20

Summary of Contents for TORNADO GTL













Reviews: