22
23
ATOMIZER HEAD PROTECTION
If the power button is held down for longer
than 10 seconds while vaping, the screen
will display “Over 10S” and the Intu Pro Mini
will refuse to power or produce any vapour.
Releasing the power button will allow normal
operation to resume.
LOW VOLTAGE PROTECTION
If battery voltage drops below 3.3V, “Low
Volt” will be displayed onscreen and the Intu
Pro Mini will turn off. Charge the battery using
the steps outlined in
“Charging the Battery”
to unlock the Intu Pro Mini allowing normal
operation to resume.
LOW BATTERY ALERT
If battery voltage drops below 2.9V while
vaping, “Weak Power” will be displayed on
screen. At this point, the Intu Pro Mini requires
charging. To charge the battery, follow the
steps outlined in
“Charging the battery”
.
SHORT CIRCUIT PROTECTION
If an atomizer short circuit occurs, the screen
will display “Short” and the Intu Pro Mini will
refuse to power or produce any vapour.
Replacing the atomizer head should allow
normal operation to resume. To replace the
atomizer head follow the steps outlined in
“Replacing the Atomizer Head”
.
NO ATOMIZER DETECTED PROTECTION
If no atomizer head is detected, the screen
will display “Check Coil” and the Intu Pro Mini
will refuse to power or produce any vapour.
Ensure the atomizer head is fully screwed into
the tank base and the tank base is correctly
screwed into the tank, then fit the tank back
onto the battery. If the “Check Coil” message
continues, replacing the atomizer head should
allow normal operation to resume. To replace
the atomizer head follow the steps outlined in
“Replacing the Atomizer Head”.
TEMPERATURE ALERT
If the temperature of the Intu Pro Mini
exceeds the maximum safe operating
temperature, the screen will display “Too Hot”
and the Intu Pro Mini will refuse to power or
produce any vapour. Stop vaping and allow
the Intu Pro Mini to cool down for normal
operation to resume.
PROTECTIONS
TW_INTU-PRO-MINI_manual.indd 22-23
TW_INTU-PRO-MINI_manual.indd 22-23
21/09/2021 11:56
21/09/2021 11:56
