20
21
STEALTH MODE
If stealth mode is enabled, the display will not
activate when pressing the power button to
vape. The display will still activate whenever
the adjustment buttons are pressed to make
changes to wattage. To enable stealth mode,
ensure the Intu Pro Mini is switched on, access
the menu by clicking the power button three
times, and navigate using the wattage up
button to “SET SCRN on/off”. Press the power
button and then use the wattage adjustment
buttons to highlight “on” or “off” press the
power button again to confirm selection.
PUFF COUNTER RESET
The puff counter on the Intu Pro Mini records
any use of the device longer than 0.6 seconds;
each usage will count as one “puff”. This
can be reset by pressing and holding the
power button and wattage down button
simultaneously.
AST DRY PROOF PROTECTION
With AST Dry-Proof enabled, the Intu Pro Mini
will attempt to prevent atomizer heads from
prematurely burning – this will cut out power if
the e-liquid level begins to get too low. When
AST dry proof is activated, the device will stop
producing power and display “DRY-PROOF”
on screen. This mode can be turned on and
off by pressing and holding the power button
and wattage up button simultaneously.
Please note:
AST Dry-Proof Mode is only
compatible with specific AST atomizer heads,
and will not work with others.
USING YOUR INTU PRO MINI
TW_INTU-PRO-MINI_manual.indd 20-21
TW_INTU-PRO-MINI_manual.indd 20-21
21/09/2021 11:56
21/09/2021 11:56
