9
Using your Corsa 200
button to shift between M1, M2 and
M3, then press the fire button to
confirm. (Also see: Configuring TCR
Mode)
Configuring TCR Mode:
To set the temperature coefficient
of resistance to match a particular
coil, when the device is powered off
simultaneously hold the fire button
and the right adjustment button to
enter the TCR configuration menu.
Use the right or left adjustment
buttons to select which to configure
from M1, M2 and M3 – this feature
allows the TCR values for 3 materials
to be stored to the device. Press the
fire button to select the TCR value
and then use the adjustment buttons
to increase or decrease the value
to your preference, long press the
fire button or leave the device for 10
seconds to confirm the selection.
TW_Corsa_200_Manual.indd 9
19/12/2016 13:20
