11
Using your Corsa 200
Pre-Heat Function:
To configure the pre-heat settings,
simultaneously hold the power and
right adjustment button to enter
logo mode. Use the right adjustment
button to select the preheat
settings (wattage and time). Use
the power button to cycle between
the wattage and time settings, then
use the left and right adjustment
buttons to decrease or increase the
setting respectively. Wattage can
be adjusted in increments of 0.1W
between 1W – 200W, and time can
be adjusted between 0 (OFF) – 2.0
seconds in increments of 0.1s. Long
press the power button to confirm
the settings.
Puff Count and Puff Duration
Display:
The puff count/puff duration is
displayed on the screen on the third
row. To shift between each mode,
press the power button 3 times
consecutively to activate the menu,
press the left adjustment button until
the puff count/puff duration flashes,
TW_Corsa_200_Manual.indd 11
19/12/2016 13:20
