Troubleshooting
37
Troubleshooting
In the event your Total Gym does not function properly, there are steps you
can take to determine where a problem may have occurred
Please follow these troubleshooting directions:
1.
Power Source:
Make sure that the power cord is plugged into the Total
Gym PowerTower™ and the wall. Check and determine that the plug on
the wall is switched on. If there is a ground fault interrupter, check to see if
it has been tripped.
2.
Total Gym PowerTower Power Switch:
Ensure that the On/Off switch on
the tower has been turned on. The light should glow red to indicate that
the power is going into Total Gym PowerTower.
3.
Fuse:
If the red light indicator is not glowing, check the fuse located near
the power outlet on the back of the tower. If necessary, replace the 5A fuse
as explained below.
4.
Power Cord:
Ensure the power cord is not damaged. If the power cord
appears damaged, go to Step 9 and call Customer Service.
5.
AC Voltage:
An interruption in the flow of voltage can cause the Total Gym
PowerTower to cease functioning. As an example, should the AC voltage
drop 40%, the Total Gym Electric DC Motor will cease to operate. After the
supply of voltage has been fully restored, the user can reset the machine
by turning the On/Off switch off and then on again. The Total Gym will then
resume functioning.
6.
Safety Key:
Make sure the safety key is inserted into the connector hole
located on top of the tower. Your Total Gym PowerTower will not operate if
the Safety Key is not in place.
7.
After Troubleshooting:
If there is still a problem after checking all of the
above items, please call 858-586-6080 to speak to a Customer Service
Representative.
Summary of Contents for GTS
Page 3: ...Owner s Guide 1 OWNER S GUIDE PowerTower GTS Sport ...
Page 34: ...32 ...