background image

WARNING

NOTE

Please stop using the product immediately when there is any abnormality such as 

rusting, peculiar smell etc.

The transportation of the product shall conform to the provisions of laws and 

regulations of dangerous goods. The built-in lithium ion battery capacity is more 

than the United Nations regulations (100Wh), therefore, the product must be 

packed, labelled and declared in accordance with IATA (international air transport 

association) regulations when transported by air or ship. Please consult with the 

shipping company for details.

Please charge in the specified voltage range (AC 100-240v). Otherwise, it may cause 

over heating, fire and other accidents.

Do not allow this product and the AC cable to get wet with water or other liquids. It 

may cause short circuit, heat, fire, etc.

Please charge, use and store this product under 40ºC, otherwise it may cause poor 

performance or overheating.

Be sure to turn off the main power button during storage to prevent unnecessary 

discharge of the battery and prevent electric shock.

Please do not put the product upside down  when using or storing it. It may cause 

leakage, heat, fire and other accidents.

When transporting the product with a car, etc., please fix the product so that it 

cannot be moved. Otherwise it may cause damage to the product, resulting in 

electric shock, heat, fire, etc.

In case of accidental fall or impact, the body of the product may be damaged and 

cause electric shock, heat, fire, etc. Please stop using immediately and contact place 

of purchase.

Please carefully read the operating instructions of any electrical products to 

be connected. Failure to operate the electrical products correctly may result in 

accidents or injuries. Before connecting electrical products, please make sure that 

the electrical products are stopped (power off), as the sudden start of electrical 

products may cause accidents or injuries.

If the liquid inside the product touches the skin or clothes, please wash off with 

water immediately. Otherwise this may cause skin irritation or injury etc.

Remove the AC cable from the socket if lightning strikes during charging.

Do not use in thunder storms, as large currents from the socket may be generated 

and cause fire and other accidents.

5

Summary of Contents for TOTALPOWER 500

















Reviews: