11
7. For an exact cut, fasten a piece of wood to the material as an aid or use the
parallel guide.
8. For miter / bevel, place the base plate in the required position.
9. Place the motherboard in its rearmost position to cut near an edge.
Maintenance and troubleshooting
Maintenance
•
Clean the jigsaw regularly (remove wood chips and chips, etc.). For best results,
do this immediately after the job has been completed.
•
Do not allow liquids to enter the jigsaw. Use a soft cloth to clean the case. Do not
use gasoline, thinners, or cleaners that can attack plastic.
•
Air vents should always be clean and clear.
Problem solving
•
If your jigsaw doesn't work, check the fuse and power at the mains plug.
•
If the jigsaw does not cut properly, check the blade and support roller, replace
the blade if it is worn. Also check the cutting angle, the blade should be exactly
90 ° to the base plate for normal use.
•
If the fault is not found, have the tool repaired at an official dealer.
•
There are no user serviceable parts on the jigsaw.
Environment
•
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
•
Contact your local authority for information on available collection systems.
•
If electrical appliances are disposed of in landfills, hazardous substances can
seep into groundwater and enter the food chain, damaging your health and well-
being.
•
Recycle raw materials instead of disposing of them as waste.
•
The machine, accessories and packaging must be classified for environmentally
friendly recycling.
