Total TP880-1, Manual

Page: 23 / 34

Graphic 5
6.2.5 Cleaning
：
6.2.5.1. Clean the air filter elements if they are to be reused.
Paper air filter element
：
Tap the filter element several times on a hard surface to remove dirt
，
or blow compressed air[not exceeding 207 kPa(2.1 kgf/cm
2
，
30 psi)] through the filter element
from the inside
．
Never try to brush off dirt
；
brushing will force dirt into the fibers
．
Foam air filter element
：
Clean in warm soapy water
，
rinse
，
and allow to dry thoroughly. Or
clean in non-flammable solvent and allow to dry
．
Dip the filter element in clean engine oil
，
then
squeeze out all excess oil
．
The engine will smoke when started if too much oil is left in the foam
．
6.2.5.2. Wipe dirt from the inside of the air cleaner case and cover
，
using a moist rag. Be
careful to prevent dirt from entering the air duct that leads to the carburetor
．
6.3 Engine Oil
See Graphic 6
6.3.1 Drain oil while engine is still warm
．
Note
：
In the interests of environmental protection
，
place a plastic sheet and a container
under the machine to collect any liquid which drains off
．
Dispose of this liquid in
accordance with environmental protection legislation
．
6.3.2 Place the rammer so it is resting on its shoe on a level surface
．
22