5
Attention
Safe operation of this machine is only possible when the operating or safety
information is fully read and the instructions contained therein are strictly
followed.
Technical data
Data sheet
Voltage
20V
Strokes per minute
0-2400/min
Stroke length
20mm
Wood cutting capacity
80mm
Mild steel cutting capacity
8mm
Product description
Caution
Always make sure the tool is turned off and the battery cartridge has been removed
before adjusting or checking the function of the tool.
Installing or removing the battery cartridge
1. Battery extraction button 2. Battery
•
Always turn off the tool before installing or removing the battery cartridge.
•
Hold the tool and battery cartridge firmly when installing or removing the battery
cartridge. If you do not hold the tool and battery cartridge firmly, they may slip
from your hands and cause damage to the tool, battery cartridge and personal
injury.
•
To remove the battery cartridge
: Slide it out of the tool while sliding the button
on the front of the cartridge.
•
To install the battery cartridge
: Align the tab on the battery cartridge with the
slot on the casing and slide it into place. Insert it all the way until it clicks into
place with a small click.
