Total TIWLI20010, Manual

Page: 11 / 16

11
Specifications of each grade of impact force
Impact strength grade
displayed on the panel
max hits Application Job
High
Squeeze when strength
and speed are desired
Assembly of the
steel structure
Und
er
Tighten when you need
fine adjustment with a
small diameter screw
Furniture assembly
•
The impact force can be changed in 2 steps: hard, soft.
• This allows for proper tightening to the job.
•
Each time the button is pressed, the number of strokes changes in two steps.
Reversing switch lever
1. Reversing switch lever
This tool has a reverse switch to change the direction of rotation.
• Press the reversing switch lever from side A to rotate clockwise.
•
Press from side B to rotate counterclockwise.
• When the direction change switch lever is in the neutral position, the switch
trigger cannot be pulled.
Attention
Always check the direction of rotation before operation.
Use the reverse switch only after the tool has come to a complete stop. Changing the
direction of rotation before the tool stops can damage the tool.
When not using the tool, always place the reversing switch lever in the neutral position.
Mounting
Attention
Always make sure the tool is switched off and the battery cartridge is removed before
carrying out any work on the tool.
Selecting the correct impact socket
Always use the correct size impact socket for bolts and nuts. An incorrectly sized impact
socket will result in inaccurate and inconsistent torque and/or damage to the bolt or nut.