background image

 

Security instructions

 

 

Caution 

Read all safety warnings and all instructions. Failure to follow warnings and instructions 

can cause electric shock, fire, and / or serious injury. 

Note: Save all warnings and instructions for future reference. 

 

1)  Work area safety 

a.  Keep the work area clean and well lit to avoid accidents. 

b.  Do not use power tools in explosive atmospheres, such as in the presence 

of flammable liquids, gases, or dust that can cause fires. 

c.  Keep children and other unauthorized persons away while using a power 

tool. Distractions can cause you to lose control of the tool. 

 

2)  Electrical safety 

a.  Power tool plugs must match the outlet. Never modify the plug in any way. 

Using a proper plug reduces the risk of electric shock. 

b.  Avoid  body contact with grounded surfaces such as pipes, radiators, 

ranges, and refrigerators. There is an increased risk of electric shock if 

your body is grounded. 

c.  Do not expose power tools to rain or wet conditions. Water entering a 

power tool will increase the risk of electric shock. 

d.  Never use the cord to carry, pull, or unplug the power tool. Keep the cord 

away from heat or oil. 

e.  When using a power tool outdoors, use an extension cord suitable for 

outdoor use. 

f.  If it is unavoidable to use the tool in  a humid location, use a residual 

current device (RCD) protected supply to reduce the risk of electric shock. 

 

3)  Personal security 

a.  Always be alert, watch what you are doing, and use common sense when 

operating the tool. 

b.  Do not use a power tool if you are tired or under the influence of drugs or 

other substances. 

c.  Use personal protective equipment. Always wear eye protection. 

Protective equipment such as a dust mask, non-slip safety shoes, hard 

hat, or hearing protection used in the right conditions will reduce personal 

injury. Also, do not wear loose clothing or jewelry. 

d.  Avoid accidentally turning the tool on. Make sure the switch is in the off 

position before connecting it to the power supply and moving it. 

e.  Remove any adjusting key or wrench before turning on the power tool. A 

wrench or wrench attached to a rotating part of the power tool can cause 

serious injury. 

f.  If dust extraction and collection devices are used, make sure they are 

properly connected. Use these devices properly and you will reduce dust 

hazards. 

 

4)  Use and care of power tools 

a.  Do not force the tool. Use the right power tool for each use. 

Summary of Contents for TH110286











Reviews: