7
•
Store the equipment in a lockable area so that it is out of the reach of children
and unauthorized persons.
•
Always keep hands and feet away from the cutting area, especially when starting
the engine.
•
Never use the machine if you are tired, if you are not 100% trained or if you are
taking any medications that could affect your vision, judgment or coordination.
•
Turn off the machine when you need to transport it. Always remove the battery
when finishing work, storing the machine or passing it to someone else.
Other Warnings and Risks
•
Use only accessories recommended by the manufacturer.
•
Never use a machine that has been modified in any way from its original
specification. Never use the machine near explosive or flammable materials.
•
Never use a faulty machine. Carry out the safety checks, maintenance and
service instructions described in this manual. Some maintenance and service
measures must be performed by trained and qualified specialists.
•
Use only replacement parts recommended by the manufacturer.
•
Always make sure that the ventilation openings are free of debris.
•
All covers, guards and handles must be in place before starting.
•
Use the machine only in daylight or other good lighting conditions.
•
Never use the machine in bad weather, such as in fog, rain, humidity or humid
places, strong wind, intense cold, risk of lightning, etc. Also, extremely hot
weather can cause the machine to overheat.
Note: Always use common sense - it is not possible to cover every conceivable situation you may
encounter. Always be careful and avoid any situations that you feel are beyond your capabilities.
If after reading these instructions you are still unsure of the operating procedures, you should
consult an expert before proceeding.
Maintenance and conservation
•
When the machine is stopped for maintenance, inspection or storage, or to
replace an accessory, turn off the power, disconnect the machine from the power
supply and make sure that all moving parts come to a complete stop.
•
Allow the machine to cool down before making any inspections, adjustments or
even putting it away.
•
Please use the machine carefully and keep it clean.
•
Store the machine in a dry place out of the reach of children.
•
Replace worn or damaged parts. Use only original spare parts and accessories.
Attention
This power tool produces an electromagnetic field during operation. This
field can, in some circumstances, interfere with active or passive medical
implants.
To reduce the risk of serious injury, people with medical implants are
advised to consult their physician before using this power tool. If the cable is damaged
or cut during work, do not touch the cable, unplug the tool immediately. Never use the
machine with a damaged cable.
The machine must not be humid and must not be used in a humid environment.
