17
Troubleshooting
From the charger while charging
LED indicator
possible error
Possible solution
flashing red led
temperature
deviation
Use the charger only when the ambient
temperature is between 5 ° C and 40 ° C
Red LED on
Contact your service agent
Note: If you still can't get your tool to work, contact your service agent.
Problem
Possible cause
Solution
Nylon does not
feed when using
the automatic
feed head
1. The nylon is welded to
itself.
2. Not enough nylon on
the spool.
3. The grass is too short.
4. Grass is tangled in the
spool.
1. Lubricate with silicone spray.
2. Install more nylon.
3. Pull the grass by alternately
pressing and releasing the spool
catch.
4. Remove the grass from the spool
and replace the nylon
Nylon wraps
around the
driveshaft
housing and
headstock
1. Mow tall grass at
ground level.
1. Mow tall grass from top to bottom
to prevent tangling.
Engine does not
start when
switch trigger is
pulled
The battery is not properly
adjusted
The battery is not charged.
Make sure the latches at the top of
the battery pack snap into place.
Charge the battery according to the
instructions.
Environment
•
Do not dispose of electrical appliances as unsorted municipal waste, use
separate waste collection facilities.
•
Contact your local authority for information on available collection systems.
•
If electrical appliances are disposed of in landfills, hazardous substances can
infiltrate groundwater and enter the food chain, damaging health and well-being.
•
Recycle raw materials instead of disposing of them as waste.
•
The machine, accessories and packaging must be selected for ecological
recycling.
•
Plastic components are labeled for classified recycling.
