Total TGT11356, Manual, Page: 12 / 14

12
Problem solving
Switch off the machine and remove the main plug before carrying out any care and
maintenance work.
Symptom Possible cause recommended action
The
machine
does not
start
The machine is not plugged in
Faulty power outlet
The fuse has blown
Faulty extension cord
plug in machine
Try another plug.
Replace fuse.
Power off other machines.
Try without the extension cord
fluctuating
pressure
The pump draws air
Dirty, worn or stuck valves
Worn pump seals
Check that the hoses and
connections are airtight.
Clean and replace or consult your
local dealer
Clean and replace or consult your
local dealer
the
machine
stops
Wrong mains voltage
Thermal sensor activated Partially
blocked nozzle
Check that the mains voltage
corresponds to the specification on
the model label.
Let the washer cool down for 5
minutes.
Clean the nozzle
The
machine
does not
dispense
water
normally
Air in the inlet hose
Inadequate mains water supply
Partially blocked nozzle
Blocked water filter
kinked hose
Let the machine run with the trigger
open until normal working pressure
is restored.
Check that the water supply
corresponds to the required
specifications
Avoid using long and thin hoses
(min. 1/2").
Clean nozzle/Clean filter Straighten
hose.
The
machine
starts, but
no water
comes out
Frozen pump/hose or accessory
no water supplies
Blocked water filter / Blocked
nozzle
Wait for pump/hoses or accessory
to thaw.
Connect the inlet water.
Clean filter / Clean nozzle
If the error or problem still persists, contact an official dealer for maintenance and
repair.
Environment
•
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
•
Contact your local authority for information on available collection systems.
•
If electrical appliances are disposed of in landfills, hazardous substances can
seep into the groundwater and enter the food chain, harming your health and
well-being.
•
Recycle raw materials instead of disposing of them as waste.