STEP • 10
© Sheds (Midlands) Limited 2021
WINDOW PANELS
Attach Window Panels
(4ft Window Panels)
10a. Place 4ft front window panel as shown and fix in place at the
meeting points with screws. Fix the panel sides with 3 screws.
10b. Repeat this step for larger models as
shown on the diagram to the left.
DID YOU KNOW?
Window panels can be placed anywhere a
4ft panel is, this counts for door panel too.
Use the RED Area as placement guide.
= Drill Points using
screws provided as shown
x3
4.0 x 70mm
Per Window Panel
DO NOT screw the standing
panels down to the floor just yet.
Leave room for adjustments when the final frame is fitted.
Repeat Steps with 4ft
Window Panels as below:
x2
x3
x3
x3
x4
www.totalsheds.co.uk
Page 9
2ft FRONT PANEL
Place the Final 2ft Panel
For 6ft, 10ft, 14ft & 18ft Sheds
11a. Place the final front panel as shown below to complete
the outer framework. Then adjust and screw down the
panels to the shed floor to make the build secure.
11b. Use the RED areas below as reference to the joining
points of the final panel. Note the 2ft section should fit
perfectly to complete the front section.
11c. Make sure all panels are straight and screwed down
firmly to each other to strengthen the outer framework
before continuing.
= Drill Points using
screws provided as shown
x6
4.0 x 70mm
Final 2ft Panel
9b.
9c.
STEP • 11
12x6ft
14x6ft
16x6ft
18x6ft
20x6ft
Repeat
x1
Repeat
x1
Repeat
x2
Repeat
Repeat
x2
x3
DRILL
DRIVER
DRILL
DRIVER
SKIP Step
Jump to Step 12
NOTICE:
8x6ft
12x6ft
16x6ft
20x6ft
SKIP Step
SKIP Step
SKIP Step
