PRE-ASSEMBLY
STEP • 1
02
Unpack all of the components and check that
you have all the parts required. Please use the
checklist on previous page.
Carefully dispose of the delivery pallet and
any excess timber.
Advisable: The underside of the floor must be
treated with a quality wood preserver.
Recommended:
Paint shed
in an oil based treatment to
prevent water ingress into
the timber. Also silicon your
windows
(Must silicon inside &
outside)
to prevent rain water
seeping through the gaps
between glass and the timber.
SHED FLOOR:
Setting Shed Base
Unpacking your Parts
SET THE SHED FOUNDATION
This Manuals Diagrams are based on the
6ft x 8ft Apex Potting Shed
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x2
4.0 x 70mm
Per Floor Section
© Sheds (Midlands) Limited 2021
www.totalsheds.co.uk
4ft Floor
1a
1a.
Secure the floor sections together by
screwing the floor bearers at each end
where they meet as shown in diagram 1a.
6ft Floor
4ft Floor
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
4x6ft
2x6ft
4x6ft
4x6ft
2x6ft
2x6ft
+
2x6ft
+
