Total Recall VR Classic Desktop
Page 30 of 32
7.
Preventative Maintenance
Total Recall VR requires minimal preventive maintenance to ensure maximum
performance.
7.1.
Air Filter
As with most computing devices, Total Recall VR has a fan that provides air flow
through the system to keep it at operating temperature. However, unlike most computing
devices, the air that enters the system is kept clean by a filter.
Every 3 months, or so, the embedded GUI will display a message and start generating an
audible beep to alert you to the fact that it is time to check and clean the filter.
Figure 13: Clean Filter Reminder Dialog
Select
OK
to dismiss the dialog. However, at this point in time the filter should be
washed in warm soapy water, and then rinsed thoroughly and allowed to dry completely
prior to being replaced.
New filters are available from us or your local Total Recall VR
supplier.
7.2.
Hard Disks
The hard disks are the hardest working component in Total Recall VR. Information is
constantly written to and read from the disks.
The average life expectancy of the hard disks is 5 years. However, as with any electronic
and mechanical technology, the disks in your system may last much longer or much less.
