Total Recall VR Classic Desktop, Quick Start Manual

Page: 19 / 32

Total Recall VR Classic Desktop
Page 19 of 32
5. Configuration
5.1. Default Configuration
Every Total Recall VR leaves the factory with a default configuration which enables it
to start recording the minute it is powered up.
In summary the default configuration is:

The display language is set to English.

The ID of the Total Recall VR is set to 1. If you have multiple Total Recall VRs
we recommend that you assign a different ID to every Total Recall VR.

The time zone is set to Australian Eastern Standard Time. The time and date are
set to the current time and date in Sydney, Australia. We recommend that you
change the time zone before starting to record.

The default passwords for the administrator and the standard user are set to
„0000‟. We recommend that you change both to improve the security of Total
Recall VR.

The LAN interface has an IP address of 192.168.1.100/24.

The Remote Manager Interface accepts connections from client applications on
IP address 192.168.1.100 and TCP port 10010.

All recordings will be kept when recorded irrespective of their duration.

Recordings will not be deleted based on their age, but will be deleted when the
occupancy of the disks reaches 95% or more, or the number of recordings in
reaches 350,000 or more.

All audio that is recorded on the analogue channels will be kept, irrespective of
the duration of recordings. The recording trigger is VOX (audio signal level)
with 15 second timeout. DTMF detection is on. Generation of recording “beep”
tone is disabled.

All SIP calls that are detected on the network that is connected to the LAN
interface will be recorded and kept. The duration of recordings of SIP call is
capped at 2 hours.

Automatic archiving of recordings is not enabled.
The following list is a summary of the default factory configuration.
General Settings
Language English
Time & Date
Use NTP No
NTP Address 1 0.0.0.0
NTP Address 2 0.0.0.0