INSTALL THE RETRACTABLE DIP BARS.
The Retractable Dip Bar assembly has been
pre-installed (Figure 1). To begin, position the rails at
the top level of the ladder. Slide the Retractable Dip Bar
handle into the assembly (Figure 2).
Align the threaded hole in the handle with the slot in
the assembly (Figure 3). Insert one hex bolt through the
assembly slot and into the threaded hole in the handle.
Tighten with a nut driver or wrench (Figure 4).
Once the Retractable Dip Bars have been installed, they
do not need to be removed. For use, simply pull the
Retractable Dip Bars out and upward into position
(Figure 5). They can be retracted and folded out of the
way as needed (Figure 6).
INSTALL THE FOLDING PLATFORM AND TELESCOPING
SQUAT STAND.
Insert the 5/16"(smaller pin) and 3/8" retractable pins
in the folding platform as indicated. Align the bottom
of the Folding Platform with the lower rails just above
the base (Figure 1). Face the ladder and prepare to
attach to the left rail first (Figure 2a).
3/8"
5/16"
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 1
Figure 2a
5/16"
3/8"
