background image

(b) Take hold of the Vertical Column and pull it up until it is upright. Release
the Spring Loaded Pin. You should hear it lock back into place.

IMPORTANT: Be sure the Spring Loaded Pin is locked into place before 
using your unit. You will know the pin is locked into place when you 
can see the end protrude through the inside of the rail bracket.

6.

Position one foot on Back Crossbar to keep the product from lifting 
off the floor. With one hand on either the right or left rail and the 
other hand holding the height adjustment Quick Release Pin out, slide 
the rails along the Vertical Column to desired position and release pin. 
Pin will pop into place - you will hear a snap. Then turn knob to the right to
tighten and secure. Last, insert straight Safety Pin (attached to the height
adjustment tube) into the hole on Vertical Column just below the height
adjustment bracket.

NOTE: Insert Safety Hitch Pin in the side hole located 

at the bottom of the Vertical Column. 
(This is the pin you removed in step 5a).

7.

Assemble the Pilates Bar at the opposite end of the unit by 
inserting it into the Front Crossbar as pictured to the right.
Make sure it is fully inserted.

8.

If the Stopper at the bottom of the Vertical Column has not already
been installed, please do so now. Locate the Stopper which is
packed in Miscellaneous Accessories (See Product Specifications
on page 5 of this manual). Unscrew nut on the end of the Stopper
and remove. Insert the Stopper into the hole located in the center of
the Back Crossbar. (See Fig. 1) Screw the nut back onto the
Stopper and tighten with Allen Wrenches provided. (See Fig. 2)

IMPORTANT: 

Proper installation of the Stopper is necessary

for the Rollers to function easily when the unit is folded and
rolled into place for storage.

9.

To add the Flip Chart, remove the cap from the Vertical Column 
(keep it for storage). Insert the Flip Chart holder base into the 
Vertical Column. Then secure the Flip Chart onto the Flip Chart Base.

—  7  —

6.

7.

Front Crossbar

5b

Height Adjustment

Quick Release Pin

Put Hitch Pin

Back Into Hole

Flip Chart

Vertical

Column

9.

Fig. 2

Fig. 1

8.

Flip Chart

Base

PILATES BAR ASSEMBLY

STOPPER ASSEMBLY

Summary of Contents for TOTAL GYM 1700 CLUB















Reviews: