8.2 VIDEO SETUP
Select
Video
in the setup menu, and display the
Video
submenu:
8.2.1 Aspect Ratio
4:3
: Choose this setting if your DVD player is connected to a normal ratio TV. You can
fill the movie to the entire screen of your TV. This might mean that parts of the picture
(the left and right edges) won’t be seen.
16:9
: Choose this setting if your DVD player is connected to a wide screen TV. If you
choose this setting and you don’t have a wide screen TV, the images on the screen
may appear distorted due to vertical compression.
Notes:
The image display ratio is related to the recorded disc format. Some discs cannot
display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format
on a wide screen TV, black bars will appear on the left and right side of the screen. You
must adjust the screen setting depending on the type of the television you have.
8.2.2 View Mode
With this option you can select the different video vision mode on the screen.
8.2.3 TV System
This product supports output of various system, including
AUTO, NTSC, PAL
.
If your TV set has only
NTSC
or
PAL
system, the screen will blink and become
colorless when a wrong system is selected. In this case, press the
N/P
button on the
Remote Control to switch the
TV TYPE
..
Note: For more information of output format, refer to the instructions or your TV set
.
8.2.4 Video Output
Selecting the Video Output setting to switch between different video outputs
Composite:
Set the video output to interlacing composite output.
RGB:
Set the video output to SCART output. If you select SCART connection, you
should set up the play mode as
RGB
state, then it will output normally.
GB-19