DC Inverter U-match Series Cassette Type Unit
22
(3). If gap still exists between ceiling and decoration panel after tightening the screws, readjust
the height of the indoor unit. (Fig.35)
Fig.35
(4).
Wire the swing flap motor as shown in Fig.36.
Fig.36
4.6.2 Installing the Panel
(1).
Place the panel at the unit, and latch the hooks beside and opposite the swing flap motor.
(2). Latch other two hooks.
(3). Tighten four hexagonal screws under the latches about 15mm.
(4). Adjust the panel along the direction indicated by the arrow as shown in Fig.37.
(5). Tighten the screws until the thickness of the sealing material between the panel and the
indoor unit reduces to 5-8cm.
Summary of Contents for TKH12K3FI
Page 36: ......