●
Wind the power cord around the
power cord hooks
.
6. Press ON/OFF button to restart the unit.
Drainage port
22
Removing Collected Water
There are 2 ways to remove collected water:
1
Use the drainage option from the lower hole.
In Cool, Dry or Heat mode operating, the condensation water will be drained to
the chassis.
. Drain the water into the small pan or a suitable place.
. Once draining is complete,re-install drain cap.
. Remove the pre-installed drain cap from the unit, If you have selected the
drainage hose, insert it into the drainage outlet.
When the chassis is full with water, the buzzer will give out 8 sounds and "H8" is
displayed to remind user to discharge water, the unit will turned off 2min latter,
and all buttons are invalid.
To empty the chassis, please follow the instructions bellow.
. Turn the unit off and unplug from the electrical outlet.
. Use a small pan or move the unit to a suitable place to drain the water.
