1
2
Function introduction for combination buttons
Combination of "
▲
" and " " buttons: About lock
Press "▲" and " " buttons simultaneously to lock or unlock the keypad. If the remote
Combination of "MODE" and " " buttons:
About switch between Fahrenheit and centigrade
At unit OFF, press "MODE" and " " buttons simultaneously to switch between
℃
and
℉
.
Nixie tube on the remote controller displays "SE". Repeat the operation to quit the function.
controller is locked, is displayed. In this case, pressing any button, blinks
three times.
▲
▲
Combination of "TEMP" and "CLOCK" buttons:
About Energy-saving Function
Press "TEMP" and "CLOCK" simultaneously in COOL mode to start energy-saving function.
Nixie tube on the remote controller displays " " and a selected temperature of "8
℃
".
(46
℉
if Fahrenheit is adopted). Repeat the operation to quit the function.
Combination of "TEMP" and "CLOCK" buttons:
About 8
℃
Heating Function
Press "TEMP" and "CLOCK" simultaneously in HEAT mode to start 8
℃
Heating Function
▲
▲
15
Press this button to achieve the on and off of health and scavenging functions in
operation status. Press this button for the first time to start scavenging function; LCD
displays " ". Press the button for the second time to start health and scavenging
functions simultaneously; LCD displays " " and " ". Press this button for the third
time to quit health and scavenging functions simultaneously. Press the button for the
fourth time to start health function; LCD display " ". Press this button again to repeat
the operation above. (This function is applicable to partial of models)
button
/
Introduction for buttons on remote controller
I FEEL Function
Press "▲" and "MODE" buttons simultaneously to start I FEEL function and " "
will be displayed on the remote controller. After this function is set, the remote
controller will send the detected ambient temperature to the controller and the unit
will automatically adjust the indoor temperature according to the detected tempera-
ture. Press this two buttons simultaneously again to close I FEEL function and " "
will disappear.
● Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.When I FEEL function is
turned on, the remote controller should be put within the area where indoor unit
can receive the signal sent by the remote controller.
