Bottom Rail
Maintenance Sticker
Middle Rail
P. 8
P. 9
Changing the upper and lower screens (moving the Middle Rail)
∗
The upper and lower screen ratio can be changed with
Twin Style by moving the Middle Rail.
∗
The changing movement for the Middle Rail is
composed of alternating stop and release movement.
Before releasing your hand from the Upper
Operation Cord, make sure that the screen is
securely stopped (be sure that the changing
movement is set to stop). If the changing
movement is not set to stop, the screen may
forcefully fall and cause injury or damage.
Caution
Bottom Rail
Cor
d Joint
(Upper Operation Cor
d)
Upper Scr
een
Lower Scr
een
Middle Rail
<Pull up the Middle Rail>
When the Middle Rail is partially raised, pull the
Cord Joint or Upper Operation Cord
downwards slightly, temporarily release your
hand and then again pull the Cord Joint or
Upper Operation Cord until the Middle Rail is in
the position you want and release your hand.
When the Middle Rail is in the lowest
position, pull the Cord Joint or the Upper
Operation Cord downwards until the
Middle Rail is in the position you want and
release your hand.
Bottom Rail
Middle Rail
Bottom Rail
Middle Rail
Cor
d Joint
(Upper Operation Cor
d)
Upper Operation Cor
d
(rear portion)
Cor
d Joint
(Upper Operation Cor
d)
Cor
d Joint
(Upper Operation Cor
d)
∗
When raising and lowering the Middle Rail, do
not pull on the rear portion of Upper
Operation Cord. Damage to the product will
occur.
<Pull down the Middle Rail >
When the Cord Joint or Upper Operation
Cord is pulled downwards slightly, the
stopper will be released and the Middle Rail
will lower. If you want to stop the Middle Rail
partway, again pull the Cord Joint or Upper
Operation Cord downwards and the stopper
will engage, stopping the Middle Rail.
About the Safety Joint
Please do not allow children to play with the operation cord. Otherwise it may become
wrapped around the neck or body and cause an unexpected accident.
Warning
The Safety Joint is a part designed so that the Operation Cord will
come apart in order to prevent danger in case of the Operation Cord
becoming wrapped around a child's neck or body.
If stress is placed on the Safety Joint or if the Operation Cord is
operated by holding close to the Safety Joint, the Safety Joint will
come apart. If it comes apart, do not attempt to use the Operation
Cord. Re-assemble the Safety Joint before use.
Safety
Joint
Your purchased product has an affixed maintenance sticker showing information related to the
product. Please refer to this maintenance sticker when inquiring about the product or for
repairs.
Bottom Rail
Shows the product specifications.
Shows the shipping date.
Product name
Installation height
Slat code
Product
width
Product
height
Operation
position
