61
Getting Started
Using external display devices
3
Connect the device’s power cable to a live electrical outlet.
4
Turn on the external device.
Your computer will automatically detect the external display
device.
To locate your RGB port, please refer to your Quick Start document.
You can change the display settings by pressing the (
) +
P
keys,
or by configuring the display properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
(
) +
P
keys:
Press the (
) +
P
keys repeatedly until the setting you want takes
effect. Briefly pause each time you press the (
) +
P
keys to allow
time for the display to change.
This cycles through the settings in the following order (the last two
options are available if an external monitor is connected):
❖
PC screen only
❖
Duplicate
❖
Extend
❖
Second screen only
NOTE
NOTE
NOTE
