1.
Turn on the power as described in Chapter 1,
following message will appear in the screen:
Enter Password [ ]
2.
Enter the Password.
3.
Press
ENTER
.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
HW Setup
This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, tap
Start -> All Programs -> TOSHIBA ->
Tools & Utilities -> HWSetup
.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Setting and USB) to allow specific functions of the computer
to be configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK
Accepts your changes and closes the HW Setup
window.
Cancel
Closes the window without accepting your
changes.
Apply
Accepts all your changes without closing the HW
Setup window.
Some options shown in grey are possible to confirm their status.
General
This window displays the BIOS/EC version and contains two buttons :
Default
and
About
.
Default
Return all HW Setup values to the factory
settings.
About
Display the HW Setup version.
TOSHIBA WT200
User's Manual
4-10
