7
Draft - Wireless IPT Quick Reference Guide 10/04
Which Codes Do I Use?
Default feature codes are listed in this guide. Check with your
System Administrator to see if these codes have been changed. If
so, write the new codes in the blank lines and cross out the default
codes. For example:
Cnf/Trn
+
#46
or
.
Unlock Telephone
The telephone will auto lock in a preset time.
³
To Unlock
1. Hold down the setup button for two seconds.
2. Enter your password, then press
#
.
Soft Keys
When Soft Key prompts appear on the LCD, the LCD Control
Button just below the prompt offers access to that feature. In this
document we refer to Soft Key/LCD Control Buttons as SK1~SK4,
starting from Left to Right. Here’s an example of how Soft Keys
work.
When an outside call is in progress, the LCD appears as shown
below.
ABR
= Automatic Busy Redial
CONF
= Conference
PAGE
= Paging
Press
SK2
to select CONF, then the display changes.
6060
ABR
CONF PGE
00:01:01
SK1
SK2
SK3
SK4
LCD Control
Buttons/Soft Keys
Soft Key
Prompts
CIX-QR-WIPT2000.book Page 7 Tuesday, September 14, 2004 5:20 PM
