3
OPERATING INSTRUCTION
PREPARATION
1. Attach the inlet hose (inner diameter 15 mm) securely.
2. Leave the drain hose fi xed until you fi nish washing. Although a small amount of water may drip from the hose while
laundering, it will not affect the operation.
3. Plug the power cord in the wall socket.
WASH / SOAK
1. Select the wash selector knob
for desired wash speed.
4. Set the Rinse Water-Level control to High.
5. Feed the water at 2~3 cm lower than “LOW” level. Add the detergent and dissolve it.
6. Put the clothes into the wash tub and feed water properly. Feed water should not exceed the level of “HIGH”.
7. Set the wash timer.
Normal wash : Set wash time by the wash timer.
Soak wash
: Set the wash timer knob to 45 min.
Good
No good
Good
a
Impeller for washing operate intermittenly between 45 to 15 min.
3. Align the water feed selector
lever to “WASH”
2. Align the drain valve knob
to “WASH/RINSE”.
CAUTION
8. After wash, align the drain valve knob to “DRAIN”.
<NOTICE>
When wash clothes do not turn smoothly, stop the wash timer and take out one or two items and reset the
wash
timer
a
When Selecting the wash selector knob for desired wash speed, please align the wash selector knob to “HEAVY” or
“GENTLE”. Don’t set the wash selector knob between “HEAVY” and “GENTLE”.
6328037401_(02-07).indd 3
6328037401_(02-07).indd 3
11/13/09 10:23:35 AM
11/13/09 10:23:35 AM
