Attach th e supplied template to the Remote Control to enter the
function names of the
buttons you have programmed.
Use a ballpoint pen etc. to write the function names.
AUD.
SET UP OPTION
0
0
0
0
LEARN
USE
TO CANCEL THE LEARNED OPERATING CODES
Set the
switch to AUX.
Set the LEARN-USE switch to LEARN.
LEARN
USE
Hold down the button of the function to cancel on the Remote Control
for about
1
second until the LEARN indicator lights up.
Hold d own RECALL and RESET at the same time for about 6 seconds
until the LEARN indicator goes off after blinking.
Note:
You cannot cancel the programming if you release the button
while the indicator is blinking.
Set
the LEARN-USE switch to USE.