Toshiba UPP350BT User Manual Download Page 105

Page: 105 / 232

5-7

EYBOARD

Windows special keys

The keyboard provides two keys that have special functions in Windows : one
activates the

Start

menu and the other has the same function as the secondary

mouse button.

This

key activates the Windows

Start

menu.

This

key has the same function as the secondary mouse button.

Keypad overlay

Your computer’s keyboard does not have an independent numeric keypad, but its
numeric keypad overlay functions like one.

The keys in the center of the keyboard with white letters make up the numeric
keypad overlay. The overlay provides the same functions as the numeric keypad on
the 101/102-key enhanced keyboard in figure 5-2.

Turning on the overlays

The numeric keypad overlay can be used for numeric data input or cursor and page
control.

Arrow mode

To turn on the Arrow mode, press

Fn + F10

. The Arrow mode indicator lights.

Now try cursor and page control using the keys shown in figure 5-2. Press

Fn +

F10

again to turn off the overlay.

Summary of Contents for UPP350BT









































































































































































































































Search results

Summary of Contents for UPP350BT

Reviews:

Related manuals for UPP350BT

Brands by name

Popular brands

Toshiba UPP350BT, User Manual

Search results

Summary of Contents for UPP350BT

Reviews:

Related manuals for UPP350BT

Brands by name

Popular brands