background image

4

•     The new hose-sets supplied with the appliance must 
       be used and the old hose-sets must not be used.
•     Before maintenance, unplug the appliance.
•     Always unplug the machine and turn off the water 
       supply after 

use. 

The standard inlet water pressure:

       0.05MPa~1MPa.
•     This appliance must be grounded. In the event of 
       malfunction or breakdown , grounding will reduce the 
       risk of electric shock by providing a path of least 
       resistance for electric current.
•     

This

 

appliance

 

is

 

equipped

 

with

 

a

 

cord

 

having

 

an

 

       

equipment

-

grounding conductor and grounding plug. 

       

The plug must be plugged into an appropriate outlet that 

       

is properly installed and grounded in accordance with all 

       

local codes and ordinances.

       

 

SAFETY INSTRUCTIONS

•     Improper connection for the appliance  when using 
       not grounded outlet or when GND terminal of outlet 
       is not suitable with GND terminal of power plug, can 
       result in risk of electric shock.. Check with a qualified 
       electrician or service person if you are in 

doubt as to 

        whether the appliance is properly grounded.

•     

Do

 

not

 

modify

 

the

 

plug

 

provided

 

with

 

the

 

appliance

If

 

it

 

       

does

 

not fit the outlet , have a proper outlet installed        

       by a qualified electrician.
•     Make sure that the water and electrical devices must 
       be connected by a qualified technician in accordance 
       with the manufacturer's instructions  and local safety 
       regulations.

Summary of Contents for TW-BH115W4PH































Reviews: