Toshiba TOSVERT VF-AS3, Instruction Manual

Page: 118 / 622

E6582062 
3. [Basic operation] Operation panel and screen display
3-14
3
9
■ Switching of backlight color
When you press the [F3] key ( mark), you can
change the color of the backlight to white or red.
The color is switched every time you press the key.
■ LCD version and Language version
You can check the version of the LCD body at the bot-
tom of the screen.
3. 1. 4 Copy function
When you press the [F2] key ("Copy") in [Standard mode], the copy function screen is displayed.
The copy function allows you to upload/download the parameters of the inverter to/from the file (mem-
ory) of the LCD body.
<Limitations>
• Copying cannot be executed between inverters with different capacities.
• Re-upload the file if you want to use parameters added with version upgrade.
• Up to 16 files can be stored. Since the 17th file cannot be created, overwrite with the same file
name.
Memo
• The LCD screen can be set regardless of the setting of inhibition of parameter change with
<F700: Parameter reading&writing access lockout>.
Mandatory
action
• The copy function cannot be used during run. Use this function when the inverter is stopped.
• Never turn off the power of the body or attach/remove the LCD during copying. Otherwise, the
memory in the LCD may be damaged, and repair (service call) may be required.
Language select
Data/Time setting
Screen contrast
Standby
LCD version
Top Language Monitor
0.0Hz STOP
17:14
2016/06/01
50%
3min
V1.3IE44
LCD screen setting
Data/Time setting
Screen contrast
Standby
LCD version
Language version
Top Language Monitor
0.0Hz STOP
16:31
2016/7/06
50%
3min
V1.3IE44
U1.10
LCD screen setting
F R