Toshiba TLP-X4500, Service Manual

Page: 29 / 55

28
TLP-X4500(P5XMLA)
By the control panel By the remote control transmitter
1. Display the menu by the “MENU”
button.
2. Select the “OPTION” on the menu.
3. Continue press the button “ ” fi rst,
then press the button “ ” together
with “RESET”, and hold for 3
seconds.
1. Display the menu by the “MENU”
button.
2. Select the “OPTION” on the menu.
3. Press the “MAGNIFY OFF” button.
Next hold the “MAGNIFY OFF”
button for 3 seconds.
To display the OSD for “HIDDEN SERVICE” menu set up.
HIDDEN SERVICE
FILTER TIME ON
MUTE COLOR BLACK
AIR-SENSOR
Setup of Filter time (“ON” or “OFF”)
1. Select the “FILTER TIME” on the OSD using button “ ” .
Next press the “ ” to select “FILTER TIME MENU” by the HIDDEN SERVICE MENU.
2. TURN ON : Select the “TURN ON” on the OSD using button “ ”.
TURN OFF : Select the “TURN OFF” on the OSD using button “ ”.
3. The OSD will be ended by no operation for 10 seconds or change of input signal. To end immediately, use
one of buttons except buttons “ ”, “ ”, “ ”, “ ”.
6-12 Set operating time display method (accumulated lamp time display method)
1. Select [OPTION] from the [MENU] display, then select [LAMP TIME].
2. Press the [RESET] button once, then press [KEYSTONE] for 3 seconds or more to display the screen
shown below. (The menu will close after 10 seconds if there are no further operations.)
3. Use “ ” or “ ” to select the usage status number. (The usage status is as shown below.)
OPTION
RUN TIME
1234h
On 00012
Off 00011
No.0
Usage status number (See below)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
Time
Number of times on
Number of times off
6-11 HIDDEN SERVICE menu