17
TLP-X4500(P5XMLA)
NO
Does the Lamp
on lower right corner of the
Network connector light
in orange?
Can’t communicate with computer
via NETWORK terminal.
Check at operating mode
Make sure Network
hardware between the
computer and the projector.
Change the
DHCP
setting to "TURN OFF",
and then set
IP ADDRESS
and
SUBNET
MASK
in the
NETWORK > SETUP
menu
with manual operation.
Is the computer
and projector connected with
cross cable?
YES
YES
NO
Are
both
IP ADDRESS
and
SUBNET MASK
in the
NETWORK > INFORMATION
menu "0.0.0.0"?
PWB assembly Drive
Use new LAN cable
YES
Set
IP ADDRESS
and
SUBNET MASK
in the
NETWORK > SETUP
menu
with manual operation.
Is the
DHCP
in the
NETWORK
menu
set to "TURN ON"?
NO
NO
Is the computer
connected with the
projector directly?
Is
either
IP ADDRESS
or
SUBNET MASK
in the
NETWORK > INFORMATION
menu set to
"0.0.0.0"?
If
SUBNET MASK
is "255.255.255.0", are
"xxx.yyy.zzz" portion of
IP ADDRESS
setting of computer and
projector
same?
PWB assembly Drive
YES
YES
Is there
DHCP server on
the network which the
Projector is connected
to?
Make sure those settings
of the projector and
computer are correct.
Change to cross-cable,
or use the straight
cable with HUB.
NO
YES
NO
YES
NO
Use the same
IP ADDRESS
in the range "xxx.yyy.zzz".
YES
YES
Change both
IP ADDRESS
and
SUBNET MASK
to
proper settings except
"0.0.0.0" with manual
operation.
NO
IP ADDRESS: xxx.yyy.zzz.N
NO
Are there
any damage to the cable
between computer and
projector?
Summary of Contents for TLP-X4500
