43
APPENDIX
Remote Control Unit
does not work.
●
Check batteries.
●
Check ALL-OFF switch on Remote Control Unit is set to “ON”.
●
Make sure nothing is between Infrared Remote Receiver and Remote Control Unit.
●
Make sure you are not too far from a projector when using Remote Control Unit.
Maximum operating range is 16.4’ (5m).
●
Check transmitted signal mode from Remote Control Unit.
(See“SETTING” section on page 38.)
Problem:
Try these Solutions
Wireless Mouse
function does not
work.
●
Check cable connection between a projector and your computer.
●
Check mouse setting on your computer.
●
Turn a projector on before turning on a computer.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
Summary of Contents for TLP-X4100E
Page 1: ...OWNER S MANUAL 3LCD DATA PROJECTOR TLP X4100E ...
Page 46: ...46 ...
Page 47: ...47 ...
Page 48: ...Part No 610 302 1805 1AA6P1P3613 PA8SA Printed in Japan ...
