56
Adjustments &
Settings
TEM
P LA
MP
ON
BUSY
FAN
ON/S
TAND
BY
KEYS
TONE
SET
AUTO
AUTO
EXIT
ENTE
R
MEN
U
INPU
T
VOL/A
DJ.
TEMP LAMP
ON
BUSY
FAN
ON/STANDBY
KEYSTONE
SET
AUTO
AUTO
ENTER
MENU
INPUT
MENU
ON /
INPUT
ENTER
CT-90072
KEYSTONE
AUTO
SET
EXIT
PIP
FREEZE
MUTE
CALL
RESIZE
VOL/ADJ
STANDBY
EXIT
VOL/ADJ.
5
5
4-b
4-b
FULL MENU settings – Display (continued)
After the settings are finished, press EXIT.
The menu screen disappears.
EXIT
EXIT
5
Press VOL/ADJ (+/-) to adjust and set.
Notes
• If the power is turned off by pressing the ON/STANDBY button, the settings made are
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs
while the projector is on, the settings are not stored in the memory.
• The “Display” settings are applied to all the input sources. (It is impossible to store different
settings for each input source.)
No signal background (Setting of screen of no signal input)
Logo:
The TOSHIBA logo screen is displayed.
Blue background: The entire screen is blue.
None:
The screen is black.
Icon
When set to “Off”, the icons displayed normally when the input is
changed or other operations are performed, are no longer displayed.
Menu position
Select the position where the menu is displayed (“Upper left”, “Upper
right”, “Bottom left” or “Bottom right”).
Menu background translucent
When set to “On”, the menu background becomes translucent.
Start-up screen
When set to “On”, the opening screen is displayed when the power is
turned on.
4-b
When selecting setting items other than “Language” in step 3.
Remote control
Control panel
(Main unit side)
