11
English
Deutsch
Espa
ñ
ol
Fran
ç
ais
日本語
简体中文
繁體中文
한국어
Control panel and remote control
(1)
(3)
(4)
(2)
(1)
(6)
(5)
(3)
(4)
(2)
Control Panel
Remote control
Name Function
Control panel
(1) ON/STANDBY
: Turn the unit on/standby
(2) INPUT
: Switch to output signal from TLPC001
document camera or computer in
(3) GAIN
: Adjust the gain value of the image (±16)
(4)
▲
,
►
,
▼
,
◄
: Pan the magnified image in camera mode
(5) WHITE
BALANCE
: Lock/unlock auto white balance
(6) ZOOM
: Zoom in and zoom out the image in
camera mode
Remote control
(1) INPUT
: Switch to output signal from TLPC001
document camera or computer in
(2) GAIN
: Adjust the gain value of the image (±16)
(3)
▲
,
►
,
▼
,
◄
: Pan the magnified image in camera mode
(4) ZOOM
: Zoom in and zoom out the image in
camera mode
12
♦
Zoom operation
TLPC001 uses 3Mega CMOS camera with the maximum pixel of H2048
x V1536 (QXGA).
•
[Sensor zoom]
Sensor zoom outputs the image up to H1024-pixel x V 768-pixel
which only uses a portion of the signal. The image is still in its original
pixel data and does not affect the image quality.
•
[Digital zoom]
Digital zoom interpolates the pixels to enlarge the image. High
expansion makes the image blurry.
•
[Zoom operation]
Zooming process changes automatically as follows:
100%
Normal
110%-190%
Digital zoom
200%
Sensor zoom
210%-400%
Sensor zoom (200%) + digital zoom
•
When the “zoom +” key is pressed for about 3 sec, it automatically
zoom in the image and stops up 200%. To continue magnification up
to 400%, release and press “zoom +” key again.
•
When switching from digital to sensor zoom (between 190% and
200%), the image would normally disappear for a moment to change
the processing mode.
LED indicator
(1)
(3)
(2)
Name Function
(1) CAMERA
: Light up in camera mode
(2) ON/ STANDBY - Blink when the unit is initializing
- Turn orange when the unit is in standby mode
- Turn green when the unit is on and ready to use
(3) LOCK
: Light up when the AWB feature is locked
