17
SETTING UP YOUR TV
Engl
ish
k
In step 9, when you select
Manual Setup
;
Press
OK
, and the
Manual Setup
screen will appear.
Press
B
or
b
to select
Network Name
and press
OK
.
The Software Keyboard window will appear (page 43).
Input the Network Name by using the Software
Keyboard. To save your setting, press the
BLUE
button.
Press
B
or
b
to select
Authentication
and then press
C
or
c
to select
Open System
,
Shared Key
,
WPA-
PSK
or
WPA2-PSK
.
Press
B
or
b
to select
Encryption
, and then press
C
or
c
to select
None
,
WEP
,
TKIP
or
AES
.
NOTE:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only
WEP
or
None
is compatible.
- When Authentication is Shared Key, only
WEP
is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only
TKIP
or
AES
is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
Press
B
or
b
to select
Security Key
and press
OK
.
Input the Security Key by using the Software
Keyboard (page 43).
To save your setting, press the
BLUE
button.
This item is grayed out when
Encryption
is
None
.
When
Encryption
is
WEP
,
Key ID
setting is available.
Press
B
or
b
to select
Key ID
and press
C
or
c
to
select
1
(default),
2
,
3
or
4
.
Press
B
or
b
to select
Done
and press
OK
.
When the message “Wireless configuration is
complete.” appears on screen, press
OK
.
NOTE:
Settings are not saved if
BACK
is pressed
before
Done
is selected.
l
The
Advanced Network Setup
screen will appear.
When the DHCP function of the router connected
with this TV is On, you can set
Auto Setup
to
On
or
Off
. (This should usually be set to
On
.)
When the DHCP function of the router is Off, set
Auto
Setup
to
Off
, and set the IP Address DNS address(es)
manually.
You can view the fixed MAC address for the TV and for
the Dual Band WLAN Adaptor, if one is installed.
Press
B
or
b
to select
Next
.
m
Press
OK
, and Network Connection Test will start.
A message will appear to indicate if the connection
was successful or if it could not be completed.
NOTE:
The result of Network Connection Test does
not always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.
To cancel the Network Connection Test:
Press
BACK
while searching for the Internet
connection.
IP Address Setup
Auto Setup
Default Gateway
Subnet Mask
IP Address
On
On
DNS Setup
Auto Setup
Secondary DNS Address
MAC Address
Primary DNS Address
Next
Advanced Network Setup
OK
Network connection was completed successfully.
Summary of Contents for TL93 Digital Series
Page 1: ...TL93 Digital Series ...
