Toshiba TheaterWide 52HMX94 Page 55 Owner'S Manual Download

Page: 55 / 108

Chapter 7: Using the TV Guide On Screen interactive program guide

TV Guide On Screen Icons

ICON

NAME

DESCRIPTION

Info Button

• Additional Info Box information is available, or the Info Box has additional sizes.

Progress Bar

• Elapsed time in current show.

• Progress bar appears in LISTINGS and SEARCH and when the Info Button is pressed while watching TV.

HDTV

• Show is presented in high-definition TV, if available.

New

• Show is new (not a repeat).

Stereo

• Show is available in stereo.

Dolby Digital

• Show is available with Dolby Digital 5.1 audio (digital channels only).

• Closed captioning is available for the show.

TV Rating

• TV rating for the show.

Record Once

• Show is set to Record Once.
• Other frequencies are Daily (manual recording only),

Regularly, and Weekly.

Record Off

• Show is set to Record but is currently Off (show remains in Schedule).

Record

• Show is Suspended due to a schedule conflict (show remains in Schedule).

Suspended

• Recording resumes when the conflict no longer exists.

Remind Once

• Show is set to Remind Once.
• Other frequencies are Daily (manual reminding only),

Regularly, and Weekly.

Remind Off

• Show is set to Remind but is currently Off (show remains in Schedule).

Remind

• Show is Suspended due to a schedule conflict (show remains in Schedule).

Suspended

• Remind resumes when the conflict no longer exists.

Info Box

• An Info Box contains information about a show, Service, or Panel Ad, or

provides general help (for example, for a panel menu).

• An Info Box for a program in the LISTINGS screen can have up to three

sizes: Small, Large, or “No.”

– Press INFO on the remote control to cycle among the sizes.
– The default Info Box size is Small. To change the default size, open the

SETUP Service screen.

• The Info Button icon (

)appears on the Info Action Bar if the Info

Box size can change and/or if there are additional Info screens. Press the
INFO key on the remote control to change the size and/or to display
additional Info screens.

• In some instances, the INFO button on the remote control is used to page

forward (for example, if there are additional pages of information in a Panel
Ad, a Channel Ad, or help text).

Info Action Bar

Small Info Box

Large Info Box

Navigating the TV Guide On Screen system (continued)

HMX94(E)052-55(7a-TVG)

9/27/04, 10:47 AM

Summary of Contents for TheaterWide 52HMX94











































































































Search results

Summary of Contents for TheaterWide 52HMX94

Reviews:

Related manuals for TheaterWide 52HMX94

Brands by name

Popular brands

Toshiba TheaterWide 52HMX94, Owner'S Manual

Search results

Summary of Contents for TheaterWide 52HMX94

Reviews:

Related manuals for TheaterWide 52HMX94

Brands by name

Popular brands