(E) 46/52/62HM94
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
94
LED Indication
Condition
Solution
1)
Green blinks 3 times
The TV is warming up.
Wait about 30 seconds until the Green LED lights continuously,
after
power cord is
and then press POWER to turn ON the TV.
plugged in
;
Red is OFF
.
2)
Green is ON
(solid);
The lamp unit door is not seated
Turn OFF the TV and unplug the power cord. Review “How to
Red blinks
continuously
properly.
replace the lamp unit” on pages 99–100 to ensure that the lamp unit
at 0.5-second intervals.
door is installed securely. If the problem persists, contact a Toshiba
Authorized Service Center.
3)
Green blinks
continuously The lamp is not working properly.
The TV automatically will try to restart itself eight times (see item #4).
at 0.3-second intervals;
Red is ON
(solid).
4)
Green and Red blink
The lamp is not working properly
Turn OFF the TV and then ON again. If the problem persists, replace
continuously at
after the eighth automatic restart
the lamp unit (see pages 98–100). If the problem still persists,
1-second intervals.
(see item #3).
contact a Toshiba Authorized Service Center.
5)
Green and Red blink
An abnormal temperature
Turn OFF the TV. Check to make sure all slots and openings in the
3 times only.
increase has occurred.
TV cabinet are not covered, blocked, or dusty. Turn ON the TV again.
If the problem persists, contact a Toshiba Authorized Service Center.
6)
Green is OFF
;
The TV requires servicing.
Turn OFF the TV and unplug the power cord. Plug the power
Red blinks
continuously
cord in again and turn ON the TV. If the problem persists, contact
at 0.5-second intervals.
a Toshiba Authorized Service Center.
Chapter 10: Troubleshooting
MENU
VOLUME
CHANNEL
EXIT
TV/VIDEO
POWER
LED indications
The green and red LED lights are on the TV front touchpad, to the left of the POWER button.
The green and red LED lights on the TV control touchpad (on the lower right corner of the TV screen) indicate the TV’s current status, as
follows:
• Green ON (solid) and Red OFF = TV power cord is plugged in but the TV is OFF. This is called standby mode.
• Red ON (solid) and Green OFF = TV power cord is plugged in and the TV is ON.
• Green and Red ON (solid) = TV front touchpad is being pressed.
• Green and/or Red blinking (see table below).
MENU
VOLUME
CHANNEL
EXIT
TV/VIDEO
POWER
Red LED
Green LED
TV front touchpad
HMX94(E)092-97(10-Trbl)
9/27/04, 10:54 AM
94
