15
(E)27HL85 size213*276
E
S
F
Connecting
y
our T
V
Using the
remote contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
Intr
oduction
[1]
HDMI = High-Definition Multimedia Interface.
[2]
DVI = Digital Video Interface.
[3]
HDCP = High-bandwidth Digital Content Protection.
[4]
EIA/CEA-861/861B compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, the technology of which is being
standardized for reception of high-definition video signals.
Because this is an evolving technology, it is possible that
some devices may not operate properly with the TV.
Connecting an HDMI™ or a DVI device to the HDMI input
TV lower back panel
HDMI device
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
To connect a DVI device, you will need:
• one HDMI–to–DVI adapter cable
(HDMI type A connector)
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below).
VIDEO
AUDIO
L
R
IN
OUT
DVI
OUT
TV upper
back panel
DVI device
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic components,
turn on the TV first
, and then the HDMI or
DVI device.
• When turning off your electronic components,
turn off the HDMI or DVI device first
, and
then the TV.
The HDMI
[1]
input on your TV receives digital audio
and uncompressed digital video from an HDMI
device or uncompressed digital video from a DVI
[2]
device.
This input is designed to accept HDCP
[3]
program
material in digital form from EIA/CEA-861/861B–
compliant
[4]
consumer electronic devices (such as a set-
top box or DVD player with HDMI or DVI output).
The HDMI input is designed for best performance
with 1080i high-definition video signals, but will also
accept and display 480i, 480p, and 720p signals.
To connect an HDMI device, you will need:
• one HDMI cable (type A connector)
For proper operation, it is recommended that you
use a short HDMI cable.
HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below). Some CDVs (Video CDs) may not output
digital audio signals. In that case, you may be able to
hear sound by connecting analog audio cables.
However, if you connect analog audio cables with this
connection, the HDMI terminal on the TV will not
receive the HDMI digital audio signal and you will
hear analog audio only.
VIDEO
AUDIO
L
R
IN
OUT
HDMI OUT
NOTE: NEVER CONNECT THIS TV TO
A PERSONAL COMPUTER (PC).
This TV is not intended for use with a PC.
TV lower back panel
#01E09-15_27HL85
05.5.12, 3:14 PM
15
Black