54
GB
TF 610
TOSHIBA
Function no:
24
25
26
27
28
36
37
38
39
Function
BUSY TONE
PUBLIC LINE
PAUSE WAIT TONE
ACCESS
ACCESS CODE
CALLING TIMES
AUTO DELAY
RCV MODE=
TEL DELAY
Advanced settings
Advanced settings
Description
The successful detection depend on the
PBAX.
ON:
active
OFF:
not active
Type of connection
PUBLIC LINE: Before dialling a tone check
is made, PABX tones are not accepted
PABX: Dialling after a delay of 3 sec., no
tone check before begin of dialling
INIT WAIT 4 SEC: Dialling after a delay of
4 sec., no tone check before begin of
dialling
~
INIT WAIT 6.0 SEC: Dialling after a delay
of 6 sec., no tone check before begin of
dialling
Procedure after obtaining public line/
pause wait
PAUSE WAIT TONE: Further dialling only
after line access dial tone, PABX tones
are not accepted
PAUSE WAIT 3.0 SEC: Dialling after a
delay of 3 sec., no tone check, after
obtaining public line/pause wait
~
PAUSE WAIT 6.0 SEC: Dialling after a
delay of 6 sec., no tone check, after
obtaining public line/pause wait
Procedure for obtaining public line
(*-key)
NO PUBLIC LINE
PUBLIC LINE FLASH:Flash-Function
PUBLIC LINE EARTH KEY:
Earth key Function
PUBLIC LINE DIGIT: Public line
obtained via code
Enter a (max.) 4-digit code for obtaining
public line. (only useful by ACCESS DIGIT)
Number of synthetic ring signals set in
the TEL/FAX mode
1 SYNTH. RING TEL/FAX
1 ring
~
10 SYNTH. RINGS TEL/FAX
10 rings
Number of rings before the fax machine
connects to the line in the automatic
receive mode (AUTO lamp is lit)
1st RING
~
10th RING
Reception type in automatic mode (AUTO
LED is lit)
TEL/FAX
TEL/FAX mode
FAX/TAD
FAX/TAD mode
Not relevant for European models
