Toshiba TF 461 Instruction Manual Download

Page: 5 / 91

TOSHIBA

TF 461

How to insert the
recording paper:

Preparation

Adjust the left paper guide as illustrated in the
diagram. To adjust the guide, press the left
paper release lever.

Insert a stack of A4 paper.

Prepare the recording paper by flexing and
fanning out the stack to separate the sheets.

Press back the paper release lever.

Do not insert any paper before pushing
back the release lever.

Insert the paper. Do not push it underneath the
feed rollers.

The paper cassette holds a maximum
150 sheets (80 g/sm). Do not use the
right paper guide.

Pull the paper release lever to the
front.

Do not use damp, wrinkled on torn
paper.

Adjust the recording paper guide to
suit the paper format used

To install the
accessories:

If required, press the document
support into the retaining holes

Remove the recording paper tray.

Insert the paper support as illustrated

Switch on the machine

Preparation

Summary of Contents for TF 461




























































































Search results

Summary of Contents for TF 461

Reviews:

Related manuals for TF 461

Brands by name

Popular brands

Toshiba TF 461, Instruction Manual

Search results

Summary of Contents for TF 461

Reviews:

Related manuals for TF 461

Brands by name

Popular brands