manualshive.com logo in svg

Toshiba Tecra S3, Maintenance Manual

Share
Download
Toshiba Tecra S3 Maintenance Manual Download Page 453

Appendices  

Appendix J  Maintenance of TOSHIBA RAID

 

J-10

 

[CONFIDENTIAL]]

 

TECRA S3 Maintenance Manual (960-532)

 

(2) Display of Logical/Physical Drive 

Logical Drive 

The status of RAID array is displayed in Logical Drive by array. The displayed items 
are follows. 

Table J-2

 

Displayed item in Logical Drive 

 Explanation 

Status 
(Status of array) 

Displays the status of array. The contents are follows.  

-OPTIMAL

：

The array works normally. 

-DEGRADE

：

The array is degraded. 

-CRITICAL

：

The array is failed. It can not be used. 

RAID Level 

Displays the RAID level. 

# of Drive 

Displays the number of physical drives incorporated in the array. 

RAID ID 

Displays peculiar ID by array. 

Capacity  

Displays the capacity of array. 

Stripe Size 

Item that is not set. 

Write Cache 
 

Displays the setting of drive write cache. “Enable” or “Disable” is 
displayed.  The default is “Enable”. This option is displayed in RAID-1 
(Mirroring). 

Degrade Bootup 
 

Displays if boot OS or not when the array is degraded. “Yes” (Boot up) 
or “No” (Not boot up) is displayed. The default is “Yes”. This option is 
displayed in RAID-1 (Mirroring). 

MBR Protection 
 

Displays the setting of protection function of MBR (Master Boot 
Record). “Enable” (Protect) or “Disable” (Not protect) can be selected.  
The default is “Disable”. 

When OS is installed by SetupInstructor, it is set automatically to 
“Enable”. When OS is installed manually, it is set to “Disable”. If 
necessary, change the setting. 

S.M.A.R.T. 

Displays the setting of failure prediction function of drive. “Enable” or 
“Disable” is displayed.  The default is “Enable”. 

Last MC 
 

Displays the date when checking of media or rebuilding of array 
executed last. It displays “00/00/00” right after making new array or 
when the rebuild limit is changed.  

 

Summary of Contents for Tecra S3
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands