manualshive.com logo in svg

Toshiba Tecra S3, Maintenance Manual

Share
Download
Toshiba Tecra S3 Maintenance Manual Download Page 179

  Tests and Diagnostics 

 

3-60 

[CONFIDENTIAL] 

TECRA S3 Maintenance Manual (960-532) 

3.23 Log 

Utilities 

3.23.1 Function 

Description 

This function logs error information generated while a test is in progress and stores the results 
in RAM. This function can store data on a floppy disk, or output the data to a printer or the 
display. 

The error information is displayed in the following order: 

1.

 

Error count (CNT) 

2.

 

Test name, Subtest number (TS-No) 

3.

 

Pass count (PASS) 

4.

 

Error status (STS) 

5.

 

FDD/HDD or memory address (ADDR) 

6.

 

Write data (WD) 

7.

 

Read data (RD) 

8.

 

HDC status (HSTS) 

9.

 

Error status name (ERROR STATUS NAME) 

If the power switch is turned off, the error information will be lost.  

Summary of Contents for Tecra S3
























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands