Toshiba Tecra M9 Series User Manual Download

Page: 62 / 261

Getting Started

Hard Drive Recovery Utilities

The size of the C: drive will display on the progress bar as you make
your selections.

Click

Next

to begin the restoration. Once complete, a message

displays that the HDD has been recovered.

Press any key on your keyboard to restart the computer.

Hard Disk Drive Recovery using the Recovery media

If you need to recover your computer to its default factory state, you
can rebuild the system using your Hard Drive Recovery Utilities.

To recover your hard disk drive using the utilities burned to CDs or
DVDs (refer to

“Creating Recovery CDs/DVDs” on page 56

Insert the first recovery CD or DVD into your optical drive and
power on the computer.

When the initial screen displays, press

F12

The boot menu appears.

Using the arrow keys, select the

CD/DVD

option and press

Enter

. The system will boot up to the Toshiba Recovery Wizard

screen.

Please refer to

“Hard Disk Drive Recovery options” on

page 57

, to explain the available recovery options.

(Sample Image) Toshiba HDD Recovery Utility screen

NOTE

Summary of Contents for Tecra M9 Series






































































































































































































































































Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands

Toshiba Tecra M9 Series, User Manual

Search results

Summary of Contents for Tecra M9 Series

Reviews:

Related manuals for Tecra M9 Series

Brands by name

Popular brands