28
Adding memory (optional)
5.375 x 8.375 ver 3.1
If your system has the memory modules stacked on top of one
another, you must remove the top module before removing/installing
the bottom module.
11
Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector’s notch with the
matching key in the socket.
(Sample Illustration) Aligning the memory module with the socket
12
Firmly press the memory module into the memory slot’s
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the socket
latch
latch
key
notch
connector
Summary of Contents for Tecra A7 Series
Page 55: ......
Page 56: ...PMA500222011 09 06 ...
